With a yearly creation of only 200 watches, the Austrian based Habring² is a little however exceptionally regarded major part in the watch business. Proprietors Maria and Richard take a great deal of pride in what they do, and this Habring² Chrono-Felix is exhibiting just that.
Let’s have a first gander at the new mono-pusher chronograph with type A11C-H1 movement.
After going through three years on building up their type A11 movement, Habring² guaranteed that they are completely free of any of the modern development makers available. This new type A11C-H1 is their most recent expansion to the A11 family and has been fitted in the Chrono-Felix chronograph watch.
In their authority official statement, the Austrian based company hops straightforwardly into the profound with a specialized clarification of the development and its capacity. I love this, yet in addition figure they do themselves somewhat short by not pausing for a minute to respect the flawlessly planned 38.5mm Habring² Chrono-Felix chronograph watch. The silver-white granular metal dial is only amazing as I would like to think, and I love the red ’12’ and the combination with the blued hands. The blued hands are in reality on solicitation, regularly the watch comes with dark anodized hands. The “12” can likewise be imprinted in dark on the off chance that you need. The smooth hands look dazzling and keep the dial truly noticeable and discernible. Just beneath the Arabic ’12’, you will locate the little printed Habring² and ‘Austria’ phrasing. This watch doesn’t need to holler at you, it is a lot of an odd take on the cold, hard truth piece. It is likewise material for the size of simply 38.5mm.
With a thickness of 10.5mm, the Habring² Chrono-Felix is an unassuming estimated watch. It will fit most wrists without a doubt and even will look great on the off chance that you have large wrists. By one way or another I end up returning to fairly more modest watches nowadays, and incline toward these approx. 39mm watches. The case is very much planned and has a combination of matt and cleaned wrapping up. Over the winding crown, you will discover the pusher to begin, pause and reset the chronograph component. The running seconds can be found on the left subdial though the privilege subdial is for recording the minutes (30-minute scale). The two sides of the watch have a sapphire precious stone fitted. The one on the posterior carries us to the hand-wound movement.
As composed over, the new A11C-H1 development depends on the A11 development. It has only one pusher to start, stop and reset the cam switch system. All switches are laser-cut but decorated by hand. The type A11C-H1 development is 30mm in measurement and 6.5mm in stature, empowering the Habring² Chrono-Felix to remain so thin. If it’s not too much trouble, locate the full development particulars below:
- Diameter 30 mm; stature 6.5 mm
- Hour hand, minute hand, little seconds hand at 9 o’clock
- Mono-pusher chronograph with a 30-minute counter at 3 o’clock
- 28,800 half-motions each hour (4Hz)
- Hand-twisted with 48 hours of force reserve
- Fine digressive screw adjustment
- Amagnetic escapement with Carl Haas balance hairspring in chronometer quality
- KIF shockproof as per DIN and NIHS
- 25 rubies
- Elaborately hand-got done with cleaned edges, improving etching, perlage, etc.
- 76 administration pertinent single components (180 sections in total)
Pricing and Availability
The Habring² Chrono-Felix is accessible at the Habring² creation site situated in Völkermarkt (Austria), yet additionally at chose retailers that carry Habring² watches. The retail cost of the new Habring² Chrono-Felix is €6250. For this, you will get an assembling watch with a mono-pusher chronograph development, and you can be certain that this remaining parts to be a selective watch because of a low creation number. A year ago, I composed an involved survey of the Habring² Doppel-Felix Rattrapante and one on the three-hands Felix back in 2015.
More data by means of the official Habring² .